Change the Time on the Standalone Clock

KB0053: Change the Time on the Standalone Clock

Solution:

1. Press the lock button in the lower right of the clock’s keypad to go into Supervisor Mode. Type in the correct security code. The default code is “00 00 00”.
2. Type in the number “74” on the keypad. This quick pick will take you directly to the Set Time menu.
3. Press the Enter button until the hour is flashing.
4. Use the Up or Down arrows to move the hour ahead or back one hour.
5. Press Enter to save the changes.
6. Press the Clear button once to exit out of supervisor mode.